国外其他
- NASM 8846-1998 Inserts, Screw-thread, Helical Coil
- NASM 1312-15-1997 Fastener Test Methods - Methods 15
- NASM 1312-17-1997 Fastener Test Methods, Method 17
- NASM 1312-19-1997 Fastener Test Methods, Method 19
- NASM 1312-20-1997 中文版 紧固件试验方法 单剪试验
- NASM 1312-20-1997 Fastener Test Methods, Method 20 single shear
- NASM 1312-21-1997 Fastener Test Methods, Method 21
- NASM 1312-24-1997 中文版 紧固件试验方法24 拧脱试验
- NASM 1312-24-1997 紧固件试验方法24 拧脱试验
- NASM 1312-26-1997 紧固件试验方法26
- NASM 1312-29-1997 Fastener Test Method, Method 29
- NASM 1312-31-1997 中文版 紧固件试验方法31 力矩
- NASM 1312-31-1997 紧固件试验方法31 力矩
- ASME B29.21M-1996(R2003) 水、污水处理设备用700等级的焊接钢和铸造链、连接件及链轮
- ASME PTC 4.2-1997 磨煤机试验规程
- NASM 1312-1997 紧固件试验方法
- NASM 1312-1-1997 中文版 紧固件试验方法1 盐雾试验
- NASM 1312-1-2010 紧固件试验方法1 盐雾试验
- NASM 1312-2-1997 紧固件试验方法2 相互作用
- NASM 1312-3-1997 紧固件试验方法3 湿度
- NASM 1312-4-1997 紧固件试验方法4 搭接剪切
- NASM 1312-5-1997 紧固件试验方法5 应力耐久性
- NASM 1312-6-1997 紧固件试验方法6 硬度
- NASM 1312-7-1997 紧固件试验方法7 振动
- NASM 1312-8-1997 紧固件试验方法8 抗拉强度
- NASM 1312-9-1997 中文版 紧固件试验方法9 应力腐蚀
- NASM 1312-9-1997 紧固件试验方法9 应力腐蚀
- NASM 1312-10-1997 紧固件试验方法10 应力破裂
- NASM 1312-11-1997 Fastener Test Methods - Method 11 Tension Fatigue
- NASM 1312-12-1997 Fastener Test Methods - Method 12
- NASM 1312-12-2002 Fastener Test Methods - Method 12
- NASM 1312-13-1997 Fastener Test Methods - Method 13 Double Shear Test
- EN 848-3-2007+A2-2009 木工机械安全.旋转刀具单面模压机械.数控镗床和靠模铣床
- EN 1113-1997 中文版 卫浴龙头制品(PN10)上的淋浴软管
- EN 1836-2005 人的眼睛保护 常规使用的太阳镜和滤光镜
- EN 14404-2004 Personal protective-Knee protectors for work in the kneeling position
- EN 14491-2006 灰尘排泄保护系统
- EN 14511-1-2004 空间加热和制冷用带电驱动压缩机的空调、液体冷却包和热泵.第1部分术语和定义
- EN 248-2002 Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr
- EN 12011-1998 Instrumentation to be used in association with non-active surgical implants. General requirements